The extension bar is situated on the bottom platform and can slide in and out just remove pins on both sides and pull it out to your desired position and put the pins back in so it stays in place.

The Wire unroller is fitted to the QUADCRATE® by using the holes at the side of the bottom platform which are also used for the positioning of the extension bar, as the wire unroller has 4 ears with holes in them so the pins can hold it in position.

The Lamb box is fitted to the back bale rack as there is holes in the bottom of the box which allow M 12 bolts through which are screwed onto a thredded plate underneath fastening the the lamb box to the bar on the bale rack.

The extension bar is to create extra plaform to work on for bigger loads and to leave the load more steady as not all loads need to be tied or straped on as the Quadcrate is designed so that whatever is put on it is inclined to stay on, but caution must be taken when driving. The extension bar is used for loads such as square bales, creep feeders, sheep troughs, sheet of metal, sheet of plyboard and useful when carrying loose silage or hay or muck when put in the first position.

The Quadcrate can hold up to 200 kgs depending on the size of the bike it is fitted to but I wouldn t recommend putting this weight onto any less than 500cc bike and with this weight would have to put weight on the front of the bike for proper handling purposes, this can be easily done if a post holder is fitted to the front of the bike as it can hold most things. The bike will tip up on the front if proper care is not taken to balance the weight, always think when loading the Quadcrate so that balance can be achieved.

A trailer NOT exceeding 500kgs can be pulled but you MUST remember to put the available bolt in position which fastens the bottom platform to a tongue welded to the platform next the bike so that not all pressure is on the bar that the hitch is connected to, avoiding this the weight of the trailer will be too great for the bottom platform resulting in it pulling out of the hinges and the trailer diconnecting so care must be taken at all times. "Think before you do"

The Wire unroller can unroll 50 metres of sheepwire in less than 15 seconds, 100 metres in 30 seconds and can unroll 3 coils of barbed wire at the same time in less than a minute, this is a great time saver, great for fencing contractors who work alone. 

The Lamb box is used for sheltering lambs when found outside, cold in lambing season, very useful for Farmers who lamb all there ewes outside. There are 2 sections in the box one is a bedded area for lambs and the other area is for vetinery materials like disposable gloves, penicilen, syringes. marking spray, feet cutters, roll of baling twine, flask of hot water to mix bestance when needed and bottle to feed it etc. The Lamb box is dual purpose so when not lambing the 2 sections can become one as you can slide out the separating sheet of chequer plate, so a coat, cap, jumper, shoes, wellies, tools and rope etc can be kept dry for later use. 

This will happen if too much weight is put on the QUADCRATE® but the size of your bike will also determine how much weight you can put on the back before you need to balance your bike by adding extra load to the front . Available Post holders are great to use as a holding devise for extra weight, at least one post holder is a great investment when buying a QUADCRATE® to hold loads on the front with ease as the chequer plate is used for extra grip so that loads wont fall off.

The Post holders are used for holding up to 25 posts so when fencing up to 50 posts can be carried this also depends on the size of the bike as of how much weight it can carry but can also be used to hold many things like bags of meal, 2 coils of sheepwire, 4 coils of barbed wire, long logs, sticks, blocks, turf even a sheep can be put into it on their back as they cant move. Buckets with handles can also be hung on the sides as there are large ball stops on the tops of the post holders. A post holder is great on the front as it can hold all these things with ease so balancing the quad when weight is on the Quadcrate is simple just put some on the front and off load from the back.